Food Safety Tech Test

Food safety management

This area covers how a manager runs food safety as a system: active managerial control, the seven HACCP principles, variances, emergencies, inspections and staff training.

Most food safety rules tell a food handler what to do with one food at one step. This area asks what the manager does so that all of those rules are followed on every shift, including the shifts the manager does not work.

Active managerial control and the person in charge

Active managerial control means the manager controls the risk factors for foodborne illness ahead of time, with procedures, monitoring and training. Waiting for the inspector to find problems is the opposite. The CDC names five common risk factors:

Risk factor Kitchen example
Purchasing food from unsafe sources Soft cheese bought from a neighbor’s home kitchen
Failing to cook food adequately Chicken served at 150°F
Holding food at incorrect temperatures Soup on a steam table at 120°F
Using contaminated equipment Lettuce cut on a board used for raw chicken
Practicing poor personal hygiene A cook wipes his nose and keeps making sandwiches

A working system has six parts: identify the risks, monitor, take corrective action, keep management oversight, train staff, and re-evaluate. A cooler log that shows 46°F three days in a row with no response is monitoring without corrective action. Reviewing the procedures a month after sushi joined the menu is re-evaluation.

The Food Code also lists five public health interventions: demonstration of knowledge, employee health controls, controlling hands as a vehicle of contamination, time and temperature parameters, and consumer advisories.

A person in charge must be present during all hours of operation. A manager who can be reached by phone does not count. The person in charge demonstrates knowledge in one of three ways: being a certified food protection manager, having no priority violations during the inspection, or answering the inspector’s questions correctly. The person in charge also makes sure staff know they must report symptoms such as vomiting and diarrhea, as described under employee health.

The usual exam mistake is to pick the risk factor by the food involved. Soup that was cooked correctly and then sat at 120°F is a holding problem, and the cooking step was fine.

What are the seven HACCP principles?

A HACCP plan is a written plan that finds the significant hazards in one operation’s menu and controls them at fixed steps. The seven principles always come in this order:

  1. Conduct a hazard analysis.
  2. Determine critical control points (CCPs).
  3. Establish critical limits.
  4. Establish monitoring procedures.
  5. Establish corrective actions.
  6. Establish verification procedures.
  7. Establish record keeping and documentation.

Here is the plan for grilled chicken breasts in a hospital kitchen:

Principle In the kitchen
Hazard analysis Raw chicken can carry Salmonella
Critical control point The cooking step
Critical limit 165°F internal temperature
Monitoring The cook checks each batch with a clean, sanitized thermometer
Corrective action Chicken below 165°F keeps cooking until it reaches it
Verification The manager reviews the logs every week and checks thermometer calibration
Record keeping Temperature logs, corrective action notes and calibration records are filed

A critical limit has to be measurable. “Cook until the juices run clear” fails that test, while “155°F for 17 seconds” for ground beef passes. The numbers come from the minimum cooking temperatures. For a food with no cooking step, such as tuna salad, the CCP is usually cold holding at 41°F or lower.

A plan belongs to one facility. A plan written for a barbecue restaurant does not cover a second location that serves poke bowls.

Two pairs get mixed up on the exam. A CCP is a step, and a critical limit is a number. Monitoring is the single check at the CCP, and verification is the later review of whether the plan works. Chili at 85°F after 2 hours of cooling shows all of it: the reading is monitoring, the missed limit is 70°F within 2 hours, and reheating to 165°F to start again is the corrective action.

When is a variance required?

A variance is a document from the regulatory authority that waives or changes a requirement of the code. The operation has to get it before it starts one of these specialized processes, and the authority usually wants a HACCP plan with the request.

Process Detail that decides it
Smoking food Only as a method of preservation. Smoking for flavor needs none
Curing food Bacon or ham made in-house
Using additives or vinegar To preserve food or so it no longer needs temperature control, such as sushi rice
Reduced-oxygen packaging of TCS food Vacuum packaging and sous vide. Clostridium botulinum and Listeria monocytogenes are the concern
Live shellfish display tank Oysters or clams that will be served to guests
Custom-processing animals Deer brought in by hunters for personal use
Sprouting seeds or beans Alfalfa or mung bean sprouts grown on site

Juice that is treated on site and packaged for later sale belongs in the same group for the exam. The Food Code text requires that this juice is treated under a HACCP plan, so the manager goes to the regulatory authority first in either case.

The Food Code allows some reduced-oxygen packaging without a variance when set conditions are met, and a HACCP plan is still required then. On the exam, a chef who wants to vacuum package soup contacts the regulatory authority before the first batch.

The common mistake is to treat every smoker as a variance case. Brisket smoked for flavor, cooked to temperature, held at 135°F or higher and served the same day needs no variance, because normal cooking and holding keep it safe. Grilling, baking and marinating in the cooler are ordinary prep too.

Emergencies and imminent health hazards

An imminent health hazard is a significant danger to health that needs immediate correction or closure. The Food Code names fire, flood, an extended loss of electricity or water, a sewage backup, misuse of toxic materials, the onset of an apparent foodborne illness outbreak, and grossly unsanitary conditions such as a heavy pest infestation.

The response has three steps:

  1. Stop operations in the affected area.
  2. Notify the regulatory authority.
  3. Reopen only with the approval of the regulatory authority.

Some cases come up often. A food truck whose water tank runs empty stops serving, because hand antiseptic and gloves cannot replace handwashing. During a power outage, staff keep cooler doors closed and write down the time and the food temperatures. TCS food that was above 41°F for more than 4 hours is discarded. If nobody can tell how long, it is discarded as well: a walk-in found at 55°F in the morning after reading 38°F at closing gives no proof.

When several guests report illness after the same dish, the manager sets the remaining food aside with a label that says do not use and do not discard. Investigators may need it for testing.

Two mistakes cost points here. One is to mop up a sewage backup and keep cooking. The other is to apply the 6-hour cooling rule to food in a broken cooler. That rule is for hot food cooled under control, as explained in cooking and cooling.

Inspections and staff training

The FDA Food Code is a model set of rules and has no force as federal law. State and local authorities adopt it, sometimes with changes, and they inspect restaurants. The exam follows the Food Code. For the workplace, the local health department decides.

Agency Role
FDA Writes the Food Code
USDA Regulates and inspects meat, poultry and eggs
CDC Investigates foodborne illness outbreaks
State and local authorities Inspect restaurants and enforce the adopted code

When an inspector arrives, the manager asks for identification, walks along and takes notes, hands over requested records such as cooling logs or shellstock tags (kept for 90 days), and reviews the report at the end. Each deficiency is corrected within the time the authority sets, starting with its cause. A weekly self-inspection with a checklist finds problems between official visits and never replaces them.

Staff are trained when hired, before they handle food, and then on a regular basis. After each session the manager records who attended, the date and the topic.

The typical wrong answers have the manager refuse entry to an unannounced inspector or wait in the office during the inspection.

What to remember

  • Active managerial control is proactive. The five risk factors are unsafe sources, inadequate cooking, incorrect holding temperatures, contaminated equipment and poor personal hygiene.
  • A person in charge is present during all hours of operation.
  • HACCP order: hazard analysis, CCPs, critical limits, monitoring, corrective actions, verification, record keeping.
  • A CCP is a step. A critical limit is a measurable value such as 165°F.
  • Monitoring is the check at the CCP. Verification is the review of the whole plan.
  • A variance is needed for smoking or curing as preservation, additives that replace temperature control, reduced-oxygen packaging, shellfish display tanks, custom-processing animals and sprouting.
  • For an imminent health hazard: stop, notify the regulatory authority, reopen only with approval.
  • TCS food above 41°F for more than 4 hours, or for an unknown time, is discarded.

Check this area with the HACCP and food safety management quiz, then continue with cleaning and facilities.

Common questions

What are the 7 HACCP principles in order?

Conduct a hazard analysis, determine critical control points, establish critical limits, establish monitoring procedures, establish corrective actions, establish verification procedures, and establish record keeping and documentation.

What is the difference between a critical control point and a critical limit?

A critical control point is a step in the flow of food, such as cooking chicken. A critical limit is the measurable value that must be met at that step, such as 165°F.

When does a restaurant need a variance?

Before it starts one of the specialized processes in the Food Code: smoking or curing food to preserve it, using additives such as vinegar so food no longer needs temperature control, most reduced-oxygen packaging of TCS food, a live shellfish display tank, custom-processing animals, or sprouting seeds or beans.

What is an imminent health hazard?

A significant danger to health that needs immediate correction or closure, such as a sewage backup, a fire, a flood, or a long loss of power or water. The operation stops, notifies the regulatory authority and needs its approval to reopen.

Is the FDA Food Code a law?

No. The FDA publishes the Food Code as a model. State and local authorities adopt it, sometimes with changes, and they inspect restaurants and enforce the rules.

Last checked against ServSafe information and the FDA Food Code in November 2026.

All practice tests